Schwinn 250 schwinn manual Schwinn Advantage User Setup Mode, Add User Profile

Schwinn Advantage™ User Setup Mode

The Schwinn® 50 Series console lets you store and use 2 User profiles. The User profiles automati- cally record the workout results for each User profile, and lets you view your workout data.

The User profile stores the following data:

•Name—up to 19 characters

•Age

•Weight

•Gender

•a Custom Workout (program profile)

•Total time (last workout, average, and total)

•Average speed (last workout, average, and total)

•Total distance (last workout, average, and total)

•Total calories (last workout, average, and total)

•Total workouts

Note: Push the STOP button to go back to the previous screen.

Add User Profile

1.From the Power-Up Mode screen, push the Schwinn Advantage™ button and hold for 3 sec- onds to go to User Setup Mode.

Note: If no User Profile is set up, the Console will show the Name prompt for User 1. If a User

Profile does exist, use the Increase/ Decrease buttons to select User 2 and push START/

ENTER.

2.The Console display scrolls across the screen “ENTER NAME” with the first character prompt of “A”.

Note: Use the Increase/Decrease buttons to move through the alphabet and blank space (found between A and Z). To set each letter, push the START/ENTER button.

Push and hold the START/ENTER button for 3 seconds to complete the entry and go to the next data prompt.

3.The Console display shows the “AGE 30” prompt. Use the Increase/Decrease buttons to adjust the default value, and push START/ENTER to complete the entry and go to the next prompt.

4.The Console display shows the “WEIGHT 150” prompt. Use the Increase/Decrease buttons to adjust the default value, and push START/ENTER to complete the entry and go to the next prompt.

32