Condition/Problem | Things to Check | Solution |
|
|
|
Console shuts off (enters | Check electrical (wall) | Make sure unit is plugged into a func- |
sleep mode) while in use | outlet | tioning wall outlet. |
|
|
|
| Check connection at front | Connection should be secure and un- |
| of unit | damaged. Replace adapter or connec- |
|
| tion at unit if either are damaged. |
|
|
|
| Check data cable integrity | All wires in the cable should be intact. If |
|
| any are cut or crimped, replace cable. |
|
|
|
| Check data cable | Be sure cable is connected securely |
| connections/orientation | and oriented properly. Small latch on |
|
| connector should line up and snap into |
|
| place. |
|
|
|
| Reset machine | Unplug unit from electrical outlet for 3 |
|
| minutes. Reconnect to outlet. |
|
|
|
| Check magnet position | Magnet should be in place on pulley. |
| (requires shroud removal) |
|
|
|
|
| Check Speed Sensor | Contact Customer Care for further |
|
| assistance. |
|
|
|
Fan will not turn on or will | Check data cable integrity | All wires in cable should be intact. If any |
not turn off |
| are cut or crimped, replace cable. |
| Check data cable | Be sure cable is connected securely |
| connections/orientation | and oriented properly. Small latch on |
|
| connector should line up and snap into |
|
| place. |
|
|
|
| Reset machine | Unplug unit from electrical outlet for 3 |
|
| minutes. Reconnect to outlet. |
|
|
|
Fan will not turn on, but | Check for blockage of fan | Unplug unit from electrical outlet for 5 |
Console operates |
| minutes. Remove material from fan. If |
|
| necessary, detach the Console to help |
|
| with removal. Replace the Console if |
|
| unable to remove blockage. |
|
|
|
48
