OPERATING MACHINE
ENGAGE CRUISE CONTROL:
B
A
1.Start with the cruise control lever (A) in the OFF position.
2.Move cruise control lever forward, at the”” position the tractor will begin to move forward.
3.Continue to move cruise control lever forward toward the “” position and the tractor will increase in speed.
4.Move cruise control lever to the desired speed and release lever.
DISENGAGE CRUISE CONTROL:
NOTE: Depressing brake/clutch pedal (B) will return cruise control lever to the OFF position.
1. Move the cruise control lever to the OFF position.
Using Reverse Implement Option
CAUTION: Avoid injury! Before moving forward or rearward, make sure area is clear of bystanders, especially children.
NOTE: Operating the mower while backing up is strongly discouraged. The Reverse Implement Option should be used ONLY when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.
1.Stop the machine FORWARD travel with mower engaged. On foot control models, be sure cruise control lever is all the way rearward in the OFF position.
2.Look behind the vehicle to be sure there are no bystanders.
A
3.Push and hold in the reverse implement switch (A) while:
•Automatic - move drive lever to the rear or press reverse pedal.
•Gear - move the gear shift lever to the R (REVERSE) position.
NOTE: If the engine and mower stop while repositioning the machine, return mower engagement lever to the OFF position and restart the machine. (See Starting The Engine in this section.) Begin again with Step 2.
4.As the machine begins to move rearward, release the reverse implement switch and reposition the machine.
5.Resume FORWARD travel. The mower should continue operating.
6.Repeat Steps 1 through 5 to reposition the machine again.
Operating Machine - 11
