| SERVICE MISCELLANEOUS |
Checking Tire Pressure | Fuel |
CAUTION: Avoid injury! Explosive separation of a tire and rim parts can cause serious injury or death:
-Do not attempt to mount a tire without the proper equipment and experience to perform the job.
-Always maintain the correct tire pressure. Do not inflate the tires above the recommended pressure. Never weld or heat a wheel and tire assembly. The heat can cause an increase in air pressure resulting in a tire explosion. Welding can structurally weaken or deform the wheel.
-When inflating tires, use a
-Check tires for low pressure, cuts, bubbles, damaged rims or missing lug bolts and nuts.
1.Check tires for damage.
2.Check tire pressure with an accurate gauge.
3.Add or remove air, if necessary:
Tire Size | |
|
|
|
|
Front: | 97 kPa (14 psi) |
|
|
Rear: | 69 kPa (10 psi) |
|
|
CAUTION: Avoid injury! Handle fuel with care, it is highly flammable and can cause serious injury or death:
-DO NOT refuel machine while you smoke, when machine is near an open flame or sparks, or when engine is running. STOP engine.
-Fill fuel tank outdoors.
-Prevent fires: clean oil, grease and dirt from machine. Clean up spilled fuel immediately.
-Do not store machine with fuel in tank in a building where fumes may reach an open flame or spark.
-To prevent fire and explosion caused by static electric discharge, while you fill tank, use a
-Use only clean approved containers and funnels.
-Store oil and fuel in an area protected from dust, moisture and other contamination.
-DO NOT use METHANOL gasoline. METHANOL is harmful to the environment and to your health.
IMPORTANT: Avoid damage! Avoid spilling fuel. Fuel can damage plastic and painted surfaces.
DO NOT mix oil with gasoline. Unleaded gasoline with an octane rating of 87 or higher is recommended.
Service Miscellaneous - 45
