U N PA C K I N G , S E T- U P A N D I N S TA L L AT I O N
Only skilled personnel should perform installation. Read and comply with all warnings and follow the proper installation procedures and safety guidelines.
•Refer to outside of crate for Uncrating/Recrating instructions.
•Take into account the weight of the laminator (1,800-
lb./818 kg net weight) when moving. Use equipment with which the weight can be safely lifted. The laminator is transported on a wooden pallet (skid). If your lamina- tor is still on its skid, you can move it with a forklift to put it near its place of use.
IMPORTANT! Set the forks of the forklift to the maxi- mum lifting width of the laminator so the laminator’s center of gravity is central between the forks.
Figure 3. Moving the laminator with a forklift.
•NOTE: We recommend that you save the transport bolts, nuts and plates of the shipping crate for any major moves that you plan to make with the laminator in the future.
•Remove the transport bolts from the skid’s transport plates with a 1/2"
•Your laminator has casters to allow for easy moving. Roll the laminator to the location it will be used. (See Workspace Area Diagram – Figure 2).
•Lock the casters once it is in place and remember to unlock them before moving the laminator again.
Accessories Included:
•4 Foot Levelers
•1/2" Wrench
•3/16" Allen Wrench
•Grease Gun Kit
•Spare Fuses (inside cabinet)
•Tape Measure
•Snitty® Safety Knife
•Image Roll Cleaner
•Terry Cloth Towel
•Spare Core for
•Owner’s Manual
•Installation Instruction Sheet
7
