Insert KEY into switch.
NOTE: Key is made of yellow piestico
1
To turn drill ON . . .
Insert finger under switch lever and pull.
To turn drill OFF.,. Push lever in.
In an emergency;.. , the drill bit BINDS... STALLS
•..STOPS ., . or tends to tear the workpiece loose
•..you can QUICKLY turn the drill OFF by hitting the switch with the palm of your hand.
To lock switch in OFF position.., hoFd switch IN with one hand.. , REMOVE key with other hand.
WARNING: FOR YOUR OWN SAFETY, ALWAYS LOCK THE SWITCH "OFF" WHEN DRILL PRESS IS NOT IN USE... REMOVE KEY AND KEEP IT IN A
SAFE PLACE... ALSO... IN THE EVENT OF A POWER FAILURE (ALL OF YOUR LIGHTS GO OUT)
OR BLOWN FUSE OR TRIPPED CIRCUIT
BREAKER, TURN SWITCH OFF . • • LOCK IT AND REMOVE THE KEY. THIS WILL PREVENT THE DRILL PRESS FROM STARTING UP AGAIN WHEN
THE POWER COMES BACK ON.
C
o
17
