Sears 113.21308 manual Aged iN ANY WAY, have IT Replaced IM, Mediately

maintenance

WARNING FOR YOUR OWN SAFETY, TURN SWITCH "OFF" AND REMOVE PLUG FROM POWER

SOURCE OUTLET BEFORE MAINTAINING OR LUB- RiCATiNG YOUR DRILL PRESS.

Frequently blow out any dust that may accumulate in- side the motor.

A coat of furniture-type paste wax applied to the table and column will help to keep the surfaces clean.

WARNING: TO AVOID SHOCK OR FiRE HAZARD, iF THE POWER CORD iS WORN OR CUT, OR DAM-

AGED iN ANY WAY, HAVE IT REPLACED IM-

MEDIATELY.

MOTOR CORD

C.... TBLACK

POWER CORD

Wiring Diagram

lubrication

All of the BALL BEARINGS are packed with grease at the factory. They require no further lubrication.

Periodically lubricate the SPLINES (grooves) in the spindle, and the RACK (teeth of the quill).

SPINDLE ASSEMBLY OF DRILL PRESS

.,_.._._._ SPLINES

RACK

"----- (TEETH)

" _"_--"- CHUCK

Sears Recommends the Following Accessories

Drill Bits		See	Catalog
Hold-Down	and Guide		9-2457
Drill Press	Vises	See	Catalog
5 pc. Stop	Collar Set	See Catalog
Sanding Drums		9-2497 - 9-2498
15 Piece Drum Sanding Kit		See Catalog

Clamping Kit	See	Catalog
Buffing Wheels up to 4" dia. max	See	Catalog
Power Tool Know-How Handbook		9-29117

Sears may recommend other accessories not listed in the manual.

See your nearest Sears store or Catalog department for other accessories.

Do not use anyaccessory unless you have received and

read complete instructions for its use.

22