Sears 113.22643 /

4

TENSION

LEVER

6

AUXILIARY

MOUNTING HOLE WORK SUPPORT

/HEX SCREW

BED

3

TRACKING

KNOB

2

BED LOCKING

HEX SOCKET

HEAD SCREW

5

TABLE LOCK

KNOB

HOLE

1

WORK SUPPORT

SANDING

BELT

SANDING

PLATE

SANDING

DISC

/

WORKTABLE

ASSEMBLY DISC

GUARD 7

ON-OFF MOUNTING

SWITCH HOLE

WARNING: To avold injury from accidental start,

turn switch "OFF" and remove plug from power

source outlet before making any adjustments.

1. Work Support. Supports the workpiece on the sand-

ingbelt.

2. Hex Socket Head Screw. Loosening screw allows

belt bed to be raisedto the vertical position.

3. Tracking Knob: Turning knob counterclockwise

causes sanding beit to move towardsthe disc;turning

knob €lockwise causes sanding belt to move away

from the disc. ....

/

4. Tension Lever. Sliding lever to the rightreleases the

sandingbeit tension: slidinglever to the left applies

belt tension.

5. Table Lock Knob. Loosening knob allows the work-

tableto betilted for bevel sanding. (Scalepointer on

table trunnion; scale attached to base.)

6. Auxiliary Mounting Hole. Allowstable assembly to

be mounted for end sanding when the bed is placed

invertical position.

7. On-Off Switch.

12

Contents

Main Save This Manual For Future Reference BELT AND DiSC SANDER FOR YOUR SAFETY: I J _ RS/CRRFTSMRN BELT AND DiSC SANDER assernbly operating orepair parts Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A. safety instructions for beUtand isc sander BEFORE USING THE SANDER BEFORE EACH USE: Inspect your sander. HANDS, FACE, EARS. safety instructions for belt and disc sander WHENEVER SANDER motor specifications and electrical requirements / contents unpacking and checking contents TOOLS NEEDED assembJy MOUNTING BELT AND DISC SANDER TO WORKBENCH r ............. h CLAMPING BELT AND DiSC SANDER TO WORKBENCH assembly INSTALLING SANDING DiSC AND GUARD INSTALLING WORK SUPPORT INSTALLING TABLE ASSEMBLY /// assembly AUXILIARY MOUNTING FOR VERTICAL SANDING J f INSTALLING THE SANDING BELT - TENSIONING AND TRACKING Page / ON-OFF SWITCH PLAN AHEAD TO PROTECT YOUR EYES, HANDS, FACE, EARS Dressforsafety, WHENEVER SANDER IS RUNNING i bas c operation BEVEL SANDING SURFACE SANDING ON THE SANDING BELT END SANDING ON THE SANDING BELT SANDING CURVED EDGES basic operation SANDING SMALL END SURFACES ON THE SANDING DISC maintenance LUBRICATION REMOVING PULLEY COVER AND INSTALLING DRIVE BELT maintenance INSTALLING PULLEY COVER troubleshooting sears recommends the following accessories Page repair parts PARTS LiST FOR CRAFTSMAN BELT AND DiSC SANDER MODEL 113.226430 SERVICE MODEL NO. 113.226430 HOW TO ORDER REPAIR PARTS BELTAND DISC SANDER Sold by SEARS, ROEBUCK AND CO., Chicago, IL 60684 U.S.A.