Sears 116.28014 manual Attachments on Handle, Attachments on Wand, Contour Brush, Wands

SUGGESTED PiLE HEIGHT SETTINGS

For best deep down cleaning, use the XLO setting. However, you may need to raise the height to make some jobs easier, such as

scatter rugs and some deep pile carpets, and to prevent the vacuum cleaner from shutting off. Suggested settings are:

H[ = Shag, deep pile, or scatter rugs. MED = Medium to deep pile.

LO - Low to medium pile.

XLO = Most carpets and bare floors.

ATTACHMENTS

CAUTION

DO NOT attach or remove handle or wands while vacuum cleaner is ON. This

could cause sparking and damage the electrical contacts or electronic controls.

ATTACHMENTS ON HANDLE

NOTE: if the

PowerMate is

attached,	turn	-Handle
vacuum	clean-
er off before		Lack

Quick

Release

_,_.__- and Pedal

3.Put attach- ments on wand as needed. See

ATTACHMENT

USE TABLE.

2. Press wand

quick release pedal with foot

and pull the

wand straight up and out of

PowerMate.

die from	han-		t
removing
wands.	Handle
	Quick	i	m_

1.Press handle Release --_'-' quick release

button and pull

up on handle. Ill

2.Slide attachments firmly on handle as needed. See

ATTACHMENT USE TABLE.

ATTACHMENTS ON WAND

1.To remove wand from

PowerMate, lock wand in

straight-up position.

CONTOUR BRUSH

The contour brush will attach to the handle

or wand for overhead cleaning of furniture such as cabinets and shelves.

I. Rotate the contour

brush and lock into S_'-_

place.

2.Attach the contour brush to the handle or wand.

-13-