MOTOR SAFETY FILTERCHANGING
WARNING
Electrlcal Shock Hazard
Turn off and unplug vacuum cleaner from electrical outlet. Do not operate the vacuum cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure and/or electrical shock.
MOTOR SAFETY FILTER
ELECTROSTATIC
This filter must be replaced when dirty. It
should be replaced regularly depending on use conditions. The filter CANNOT be
washed as it will lose itsdust trapping abil= ity.
2.Lift the rubber retainer and pull out motor safety filter as shown.
_ |
| _ | 3. Replace | the | filter, | ||
|
|
| the | dust bag, by | |||
|
|
| sliding | it back | into | ||
__ |
|
| place | under | the ribs in | ||
|
| hite | side | out, | facing | ||
| Rubber | _j_ | the | bag cavity. | Tuck | ||
| filter | in so that | it fits | ||||
Y_ | Retainer | f | completely | under the | |||
|
| rubber | retainer. |
| |||
NOTE: See PARTSAND FEATURESfor
Motor Safety Filter number.4. Replace the bag as outlined in the BAG
CHANGING section.
1.Remove the bag as outlined in the BAG
CHANGING section.
EXHAUST FILTER CHANGING
WARNING
Fire and/or Electrlcal Shock Hazard
Do not operate with a clogged exhaust filter or without the exhaust filter installed.
Do not operate without filter cover
installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be replaced when dirty. Replace the filter when the entire surface area is covered
evenly. The filter CANNOT be washed as it will lose its dust trapping ability.
NOTE: See PARTSAND FEATURESfor exhaust filter number.
1.Press latch down to release the exhaust filter cover from slot in canister.
3.Remove the exhaust filter
using the recess as
shown.
Filter
Cover
2.Pull filter cover outward to remove from canister.
./
