BAG CHANGING
For best cleaning results, the dust bag should be changed often. The electronic performance indicator will come on when the bag needs to be changed or the airflow is blocked.
NOTE: See PARTSAND FEATURESfor Bag Number.
1.Turn off and
unplug vacuum cleaner.
2. Remove hose from canister.
3. Pull hood
release out and up,
7.The red bag mount will flip forward after removing bag. This will prevent the hood from closing until a new bag is installed.
Note: DO NOT bend or crease the middle ofthe cardboard when installing the bag into the bag mount slots.
8.Rotate red bag mount down and install bag into slots per illustration, pushing down until the cardboard tab locks into position and the holes align.
9.Tuck the bag securely into the bag
cavity so that none of the bag is able to be pinched by the hood.
then lift canister
hood. |
|
|
| |
4. Disengage |
|
| ||
cardboard tab | from |
| ||
red bag mount by |
| |||
pulling | away and |
| ||
lifting | up. |
|
| |
Motor |
| 5. Pull bag out of | ||
Safety | _, | |||
the red bag |
| |||
|
| mount. |
| |
|
| 6. Check the |
| |
|
| motor safety | filter | |
|
| and replace, | if | |
|
| necessary. |
| |
10. Close and latch canister hood.
1. Insert hose into canister until it snaps in place.
12.Plug cord into wall outlet.
CAUTION
NEVER REUSE A DUST BAG. Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot, new car-
pet llnt, etc. can clog the bag and cause it to burst before it is full and may cause damage to vacuum cleaner motor.
Change bag more often when vacuuming these materials.
CLEANING EXTERIOR AND ATTACHMENTS
1.Turn off and unplug vacuum cleaner. DO NOT drip water on vacuum cleaner.
2.To clean exterior, or to reduce static electricity and dust
,CAUTION
Do not use attachments if they are wet. Attachments used in dirty areas, such as under a refrigerator, should not be used on
other surfaces until they are washed. They could leave marks.
=17=
