CANISTER
1.Open the canister hood.
2.Check to see that the dust bag is
properly installed. See BAG CHANGING for instructions.
3. Check to see that the motor safety filter is properly installed. See MOTOR SAFETY FILTER CHANGING for instructions.
HOOD AND TOOL STORAGE
COVER
It is normal for the canister hood and tool storage cover to come off when opened further than needed. Line up the hinge slots, insert the hinges into the slots, and close the hood and tool storage cover to reinstall.
CAUTION
Never open canister hood with the tool storage cover open. This will help to prevent damage from occurring to the canister hood and/or fool storage cover.
HOSE
1.Line up the hose latch tab
and notch in canister hood
and insert hose Latch
into canister until Tab it snaps into
place.
To remove: Do not open hood before removing hose. With hood closed, lift hose latch tab upward and pull on hose.
|
| 2. Insert | |||
Handle |
| handle | into | ||
|
| wand |
| until | |
|
| lock | button | ||
|
| snaps |
| in | |
|
| place. |
| Be sure | |
|
| hose | is not | ||
|
| twisted. | |||
Lock | m |
|
|
| |
Button | To remove: | ||||
_ | |||||
| Y | Press |
| handle | |
Handle |
| quick |
| release | |
Quick |
| button | and pull | ||
Release |
| up on | handle. | ||
|
| ||||
To store: Disconnect hose form wands and canister to prevent stress on hose during storage. Store hose in a loosely coiled
position on the hose covering is not stressed.
This canister is equipped with an
To install:
Open the Pet PowerMate storage cover. insert the Pet PowerMate, press down into place, and close the lid securely.
To Remove:
Open the storage cover. Remove Pet PowerMate from the storage area and use as needed (see ATTACHMENTS and
ATTACHMENT USE TABLE).
Pet PowerMate
Storage Cover
