FEATURES
KNOW YOUR LASER TRIM SAW
See Figure 1.
Before attempting to use this product, familiarize yourself with all operating Features and Safety Rules
EDGE GUIDE
Edge guide is used when making long or wide rip cuts with the saw.
SWITCH TRIGGER
The trim saw is equipped with a
BLADE WRENCH STORAGE
Convenient wrench storage for quick blade changes.
DEPTH CUT
Adjusts the depth of cut from 0 in. to
SPINDLE LOCK
The spindle lock allows you to secure the blade when turning the blade screw.
NOTE: Do not run trim saw with spindle lock engaged.
DUST CHUTE
To direct saw dust and chips away from the operator, a dust chute is located on the side of the upper blade guard.
ERGONOMIC DESIGN
The design of your trim saw provides for maintaining proper two hand control when cutting. It has been de- signed to be comfortable and easy to grasp.
LASER GUIDE
The laser guide will generate a red colored line on the work surface when turned on.
ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Cordless Trim Saw with Laser
Laser Batteries Charger Edge Guide Blade Wrench Operator’s Manual
WARNING: If any parts are missing do not operate the tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
REMOVING BATTERY PACK
See Figure 2.
nLocate latches on side of battery pack and depress to release battery pack from your saw.
nRemove battery pack from your saw.
DEPRESS LATCHES TO
RELEASE BATTERY PACK
TO
REMOVE
TO | LATCHES |
INSTALL |
|
BATTERY PACK |
|
| Fig. 2 |
10
