Sears 385.4052LX200 owner manual Using the Seam Guides on the Needle Plate

Using the Seam Guides on the Needle Plate

The seam guides on the needle plate help you to measure seam width.

*The numbers indicate the distance between the center needle position and the guide line.

Guide lines

(2)Cornering guide

(3)Needle plate

_4_Needle plate hole

(5_ Seam width from the center needle position

Turning Square Corners

To turn a square corner 1.6 cm (5/8") from the fabric edge. When the fabric edge facing you lines up with the cornering guide as illustrated, stop stitching and lower the needle by turning the handwheel towards you.

Raise the presser foot and turn the fabric to line the edge with the 1.6 cm (5/8") seam guide.

Lower the presser foot and begin stitching in the new direction.

(2) Cornering guide

Variable Needle Position

When the straight stitch (pattern A) is selected, you can move the needle between center and left needle position by turning the stitch width dial.

®

_0 1 2 3 4 5_

34