Sears 721.67602, 721.67601 Location Of Model Number, Oven Specifications, Grounding Instructions

Models: 721.67602 721.676 721.67601

1 52
Download 52 pages 42.15 Kb
Page 5
Image 5
LOCATION OF MODEL NUMBER

Please read this owner's m_nual, It wiil tell you how to use all the fine features of this microwave

oven,

LOCATION OF MODEL NUMBER

To request service information or replacement parts, service center wil! require the complete model number of your microwave oven The number is on the oven front as shown in the illustration below.

NODELNUMBERLABEL

OVEN SPECIFICATIONS

Output Power

900W (IEC 705 Standard)

Outer" Dimensions

29-15/16" x 16-7/16'x_ 15-3/8"

Cavity Volume

1,3 Cu.ft

Net Weight

58 tba.

ELECTRmCAL RATING

Electrical Rating of the Oven:120V AC 60Hz

*tl.9 Ampsi 1350 Watts ( MWO Only)

*12.9 Amps / 1500 Watts ( MWO + Cooktop Lamp + Ventilation Fan)

GROUNDING INSTRUCTIONS

This appliance must be grounded. _fan electrical short circuit occurs, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The cord for this appliance has a grounding wire with a grounding plug, Put the plug into an outlet that is properly installed and grounded,

WARNING - if you use the greunding plug improperly, you risk electric shock.

Ask a qualified etectriaan if you do not understand the grounding instructions or if you wonder whether the appliance is properly grounded.

Becaese this appliance fits under the cabinet, it has a short power-supply cord, See the separate tnata}lation Instructions for directions on properly placing the cord Keep the electrical power cord dry and do not pinch or crush it in any way.

if it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug_ and a 3-slot receptacle that wift accept the plug on the appliance. The marked rating of the extension cord shall be equal to or greater than the electrical rating of the appliance,

Ensure proper ground exists before use

ELECTRICAL REQUIREMENTS

The oven is designed to operate on a Standard 120V/60Hz household outtet. Be sure the circuit is at

least 15A and the microwave even is the on_y appliance on the circuit It is not designed for 50Hz ot any circuit other than a 120W60Hz circuit,

For a permanently connected appliance:

This appliance must be connected to a grounded metaliic, permanent wiring system, or an equipment grounding conductor should be run with the circuit conductors and connected to the equipment grounding terminal or lead on the appliance,

Page 5
Image 5
Sears 721.67602, 721.67601 Location Of Model Number, Oven Specifications, Grounding Instructions, Electrical Requirements