4 . ASSEMBLING AND INSTALLATION
Assembling should be performed as per this manual. Since this is a complex machine, erroneous assembling may cause damage to the machine, or malfunc- tioning to occur.
When assembling, be sure to perform work by plural persons.
Depending on the assembly work, there are some cases in which performing the work by a single person can cause personal injury or parts damage.
When carrying out the assembly work, follow the procedure in the following
1
2
3
4
5
ASSY OF THE REAR CABI (COCKPIT)
ASSY OF BILLBOARD
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
POWER SUPPLY
ASSEMBLING CHECK
Note that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm width across flats are required for the assembly work.
1
ASSY OF REAR CABI (COCKPIT)
Permanantly tightening the hex bolts should not be completed until the leg levelers are adjusted prop- erly.
9www.seuservice.com
