7 - 8 VOLUME SETTING
When VOLUME SETTING is selected, the following appears on the screen and each operating unit’s
Volume can be set.
If the operability is unsatisfactory, or when the Volume is adjusted or replaced, set the Volume in this mode.
The 3 kinds of Volume Settings for HANDLE, ACCEL, and BRAKE are to be set. The Max. value, Min.
value for each and the HANDLE’S CENTER value are to be set as applicable.
VOLUME SETTING
HANDLE SETTING AD0:78H
CENTER 78H
LEFT MAX 1aH
ACCEL SETTING AD1:30H
MIN 31H
BRAKE SETTING AD2:38H
MIN 39H
>EXIT
SELECT WITH SERVICE BUTTON
PRESS TEST BUTTON TO EXIT
FIG. 7.8 VOLUME SETTING
1Press the SERVICE button to select the Volume value to be changed.
2Press the TEST button to cause the characters of the selected Volume value to turn red.
3Input the value in the manner corresponding to the selected item.
4Press the SERVICE buton to select EXIT, and press the TEST button to return to the MENU mode. At the same time the VOLUME SETTING is finished, the input values are stored as the Max. and Min. values.
25www.seuservice.com
