Check Volume values in the Test Mode.
Since work is performed inside the energized cabinet, be very careful so as not to touch undesignated portions. Touching places not specified can cause an electric shock or short circuit.
1Take out the 2 truss screws and remove the Front Cover from the Accel. & Brake unit.
2Loosen the screw which secures the Potentiobase, and
adjust the Volume Value by moving the Base.
3Secure the Potentiobase.
4Perform Volume setting in the Volume Setting Mode.
10 - 2 GREASING
Be sure to use designated grease. Using undesignated grease can cause parts damage.
Once every 3 months, apply greasing to the Spring and Gear Mesh portion. For spray greasing, use GREASE MATE
(PART No.
37www.seuservice.com
