3
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
Be sure to have all the Adjusters make contact with the surface. Unless the Adjusters come into contact with the surface, the Cabinet can move of itself, causing an acci- dent.
This machine has 4 each of casters and adjusters (shown below). When the installation position is deter- mined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5mm. from the floor and make sure that the machine position is level.
1Move the machine to the installation position.
2Cause all of the leg levelers to make contact with the floor. By using a wrench, make adjustments in the height of the leg adjusters to ensure that the machine's position is level.
3After making adjustments, fasten the leg adjuster nut upward and secure the height of the leg adjuster.
www.seuservice.com12
