Sega 999-0886-01 owner manual Output Test

7 -4 INPUT TEST

Select INPUT TEST to have the screen shown below appear and to observe the status of each switch and the value of each V.R. on the Control Panel. Periodically check the status of each switch and V.R. on this screen.

By pressing each switch, if the display on the right- hand side of the name of each switch changes to ON from OFF, the SW and the wiring connections are satisfactory.

To check CHUTE 1 & CHUTE 2 coin switches, open the COIN CHUTE DOOR and insert a coin(s) in the slot.

Press either the TEST BUTTON and the START

BUTTON to return to the test menu.

As a standard, refer to the following for each of the

FIG. 7.4 INPUT TEST Volume’s adjustment. By operating the Handle (Steer- ing Wheel) and Pedal, if the V of each Volume guage smoothly moves as the corresponding value varies ina natural manner, then it is satisfactory.

7 - 5 OUTPUT TEST

Choose OUTPUT TEST to cause the following lower screen to appear. In this test, check the status of each

lamp.

The right-hand side “ON” & “OFF” display of START LAMP automatically alternates. The lamp lights up when “ON” is displayed and goes off when “OFF” is displayed. Check to ensure that the lamp lights up and goes off in consistency with the display of “ON” and “OFF”.

Press the TEST button to return to the TEST MENU.

FIG. 7.5 OUTPUT TEST

23www.seuservice.com