CHAPTER 3
POLISHING PREPARATION
In this chapter, all the preparations prior to starting polishing are explained.
3.1 POLISHING DISK PREPARATION
Step 1 | Disconnect the power cord |
Polishing disk (underside) | from the outlet. |
Grease here
Polishing disk
Guide pin
Drive coupling
Step 2 Apply grease included in the product to the underside of the polishing disk. Also apply grease to the center hole of the underside.
Step 3 Attach the polishing disk to the drive coupling, fitting the guide pins on the drive coupling into the holes on the underside of the polishing disk.
NOTE
Make sure the pins on the drive coupling go into the holes on the underside of the polishing disk.
NOTE
Do not use the polishing disk without applying grease to prevent the machine from being worn out. Apply grease to the disk before it dissipates. It is recommended that you should apply grease once a month.
3 - 1
