![](/images/new-backgrounds/1302496/30249665x1.webp)
4.5 FINISHING (3RD POLISHING)
Weight
Weight arm lever
Rotation stop pin
Holding jig
Notch in holding jig
Rotation stop pin
Thrust pin
Notch in holding jig
Step 1 Replace the polishing film for polishing with the polishing film for finishing (white label), then set the weight position for finishing.
Step 2 Pull the weight arm lever toward you.
Step 3 Using the squeezable dropper bottle, apply polishing fluid to the entire surface of the polishing film.
NOTE
Apply 2 ml or more polishing fluid
Step 4 Put the holding jig (after completing the polishing step) onto the polishing film with the rotation stop pin in the notch in the holding jig.
Step 5 Lift the weight arm lever up, setting the thrust pin into the hole in the center of the holding jig.
4 - 10