| CAUTION | |
| Make sure that the ferrules do | |
Dividing plane | not move after clamping them in | |
the holding jig. | ||
|
Wire tie
Fiber
Ferrule
Holding jig
Setup stand
Step 5 Separate the fibers into two bundles, one on each half of the holding jig, and tie each bundle with a wire tie.
NOTE
If you have less than six ferrules to polish, use dummy or unusable ferrules so there are at least six ferrules mounted in the holding fixture. This is so that the ferrules will get polished at an equal quality level.
4 - 2
