NOTE
Make sure that the weight arm lever goes to the full up position. If it does not, the correct polishing pressure will not be applied to the holding jig and polishing will not be performed correctly.
NOTE
Take care not to pinch your hand with the weight when you attach or detach the holding jig to or from the machine.
Step 7 Close the protection covers.
Step 8 Set the timer to 1 min. 30 sec. (standard).
Preparation for polishing is complete.
Step 9 Press the ON button. The polishing disk begins to rotate and polishing begins.
NOTE
Press the OFF button if there is any problem. The polishing disk will stop rotating and polishing will stop.
4 - 7
