4.6 POLISHING CONDITION CHECK
Check the condition of the ferrule tips after polishing. If there was a deep scratch caused in the fiber during the adhesive removal step, satisfactory polishing cannot be obtained. In this case, repolish.
NOTE
When repolishing ferrules that have an unsatisfactory polished condition, polish from the grinding step to the finishing step to obtain consistent polished quality.
(1) | Speckles |
| (2) | Slight Scratch | ||
|
|
|
|
|
| |
|
| Speckles |
|
| Slight scratch | |
|
| |||||
Repolish, doing the polishing and | Repolish, doing the polishing and | |||||
finishing steps. |
|
| finishing steps. |
| ||
Occurs near the end of the life of | Occurs when there is insufficient | |||||
the polishing film. |
|
| cleaning | between | polishing | |
Occurs | when | the | ferrule | steps. |
|
|
mounting |
|
|
| Occurs when you rub the tips of | ||
in the holding jig is poor. |
| the ferrules against the polishing | ||||
|
|
|
| film when mounting the holding | ||
|
|
|
| jig |
|
|
|
|
|
| to and removing it from the | ||
|
|
|
| polishing unit. |
| |
|
|
|
|
|
|
|
4 - 13
