Kodak 8650 manual When mismatches occur, Ribbon type mismatch, Receiver type mismatch

Troubleshooting the printer

When mismatches occur

Mismatches result from differences in requested ribbon type, media type, or media size.

Ribbon type mismatch

If the print job specifies a ribbon type that is not loaded, a mismatch occurs. Ribbon mismatches result from:

•Lamination differences (for example, XtraLife ribbon is requested but is not loaded). For this situation, you can press Print to print the job with the currently loaded ribbon.

•Image size differences (for example, a large image size is requested but oversize ribbon is not loaded). For this situation, you must change the ribbon or press Cancel to cancel the job.

•Ribbon color differences (for example, black-only printing is requested but a color ribbon is loaded). For these situations, you must change the ribbon or press Cancel to cancel the job.

Receiver type mismatch

If the print job specifies a media type that is not loaded (for example, paper is requested but transparency material is loaded), a mismatch occurs. You have three choices:

•Load the correct media type

•Press Print to override the error without changing media

IMPORTANT: Printing without loading the correct media type may result in poor color reproduction.

•Press Cancel to cancel the job

Receiver size mismatch

If the print job specifies a media size that is not loaded, a mismatch occurs. Size mismatches are of two types:

•The image size will fit on the loaded media. You can load the correct size or print on the currently loaded media

•The image size is larger than the loaded media. Change the media or cancel the job.

4-8 October 1997