DTS RV4700 DTS-ES manual When selecting the LFE LEVEL CONTROL

When selecting the LFE LEVEL CONTROL

Press the CURSOR UP( )/DOWN( ) buttons to select the LFE LEVEL CONTROL, then press the

1 ENTER button.

ENTER

L F E L E V E L C O N T R O L
D O L B Y	----- +	0	dB
D T S	----- + -----	0	dB
M P E G ----- + -----		0	dB

R E T U R N : B a c k, : S e l e c t

Press the CURSOR UP( )/DOWN( ) buttons to select the desired LFE level mode.

2

• Each time these buttons are pressed, “ ” is moved to the corresponding LFE level mode.

Press the CURSOR LEFT( )/RIGHT( ) buttons to adjust the selected LFE level as desired.

3

• Each time these buttons are pressed, the LFE level can be adjusted within the range of either -10~0 dB for Dolby Digital program sources or -10~+10 dB for DTS and MPEG program sources.

• In general, we recommend the LFE level for Dolby Digital program sources to be set at 0 dB and at +10 dB for DTS program sources.(However, the recommended LFE level for some early DTS program sources is 0 dB.) If the recommended levels seem too high, lower the setting as necessary.

Repeat the above steps and until each level is adjusted as desired.

4

38