DTS RV4700 DTS-ES manual Select the desired channel, Adjusting each channel level

Models: RV4700 DTS-ES

1 50
Download 50 pages 19.15 Kb
Page 23
Image 23

Adjusting each channel level

 

4

Adjust the level of the selected channel

 

as desired.

• If you have performed the CH LEVEL TRIM

procedure on the OSD menu, you need not to do this

 

 

procedure. (For details, refer to “SETTING THE CH

 

 

LEVEL TRIM” on page 45.)

 

 

MULTI CONTROL

Select the desired channel.

 

 

CH LEVEL

 

 

or

3

 

 

 

 

 

 

 

DOWN

UP

CHANNEL

CH SEL

 

 

SELECTOR

 

 

 

or

 

• If the channel display disappears, start from the above

 

 

 

 

step

again.

• Each time this button is pressed, the corresponding

 

 

 

 

 

 

 

 

 

channel is selected and displayed for 3 seconds as

 

 

 

 

 

follows:

5

Repeat the above steps

and

to

 

 

FRONT-L CENTER(or FRONT-C) FRONT-R SURR-R

 

 

adjust each channel level until the sound

 

 

 

 

 

 

SUBWOOFER SURR-L (( SURR-C) or ( BACK-L BACK-R))

 

level of each speaker is heard to be

 

 

 

 

 

 

 

 

 

equally loud.

 

 

According to the speaker setting( None or No), center, surround, surround back or subwoofer channel will not be selected.

Adjusting each channel level with test tone

7

At each channel, adjust the level as desired

• Only when playing a program source in available

until the sound level of each speaker is

heard to be equally loud.

 

surround modes except the DOLBY VIRTUAL

 

 

 

 

mode, the volume level of each channel can be

 

 

 

 

adjusted easily with the test tone function.

MULTI CONTROL

 

 

Note : When the 7.1 CH DIRECT is selected as an

 

 

 

 

input source, the test tone function does not

 

 

 

CH LEVEL

work.

 

 

or

 

 

Enter the test tone mode.

DOWN

UP

 

 

6

 

 

 

 

 

 

 

 

 

 

• You can select the desired channel and adjust its level

TEST TONE

 

with repeating the steps

and

in “Adjusting each

 

 

 

or

channel level” procedure.

 

 

 

 

 

 

 

 

TEST

 

 

 

 

 

TONE

 

 

 

 

 

 

8

Cancel the test tone function.

• The test tone will be heard from the speaker of each

 

 

 

 

 

 

 

channel for 2 seconds as follows:

 

 

 

 

Front Left Center

Front Right Surround Right

 

TEST TONE

 

 

Surround Left ((

Surround Center) or ( Back Left Back Right))

 

or

 

 

SUBwoofer

 

 

 

 

 

 

 

 

TEST

 

 

 

 

 

TONE

According to the speaker setting (None or No), the test tone of the corresponding channel is not available.

23

Page 23
Image 23
DTS RV4700 DTS-ES manual Select the desired channel, Adjusting each channel level