Integra DTR-7.1 Example of how to connect your equipment, Radio antenna See page, Input source

Example of how to connect your equipment

Standard connections

RS 232

TV monitor or Projector

(MONITOR OUT)

8. Refer to page 19

Here is explanation of how to connect the main components to the DTR-7.1 in the standard manner. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should only be thought of as such. It is best to fully understand the nature of each connector and terminal as well as each of your components and their features to ascertain which method of connection is best.

•Be sure to always refer to the instruction manual that came with the component that you are connecting.

•Do not plug in the power cord until all connections have been made.

•For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used for the left channel, and yellow connectors (marked V) are used for video connection.

•Insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or damage to the equipment.

•Do not bind audio connection cables with power cords and speaker cables. Doing so may adversely affect the sound quality.

For a detailed explanation of how to connect the devices given below, refer to the pages listed.

Speakers: See page 20

Radio antenna: See page 22

Enjoying the DTR-7.1 from a remote room (Zone 2):

See page 24

Power amplifier: See page 26

Default setting

Input source	Digital input	Component video
CD	OPTICAL 1
PHONO	----
FM
AM
TAPE	----
DVD	COAXIAL 1	INPUT 1
VIDEO 1	COAXIAL 2	----
VIDEO 2	----	----
VIDEO 3	OPTICAL 2	INPUT 2
VIDEO 4	----	----

----: No setting : Not applicable

17