Input Setup
2-2. Video Setup sub-menu
Menu
1.Speaker Setup 2.Input Setup 2.Input Setup
Input:DVD 3.Listening Mode Setup
4.Preference
5.OSD Setup b.VideoInput:DVDSetup
c.Listening Mode Preset da..ToneVideoControl:DVD e.IntelliVolume
fb..12VComponentTriggerVideo ENTER Quit:OSD
:Input1
ENTER Quit:OSD
Quit:OSD
a. Video
This setting allows you to match the audio from one component with the video from another. Therefore, you can set a video source to be displayed while the audio from another input source is heard. For example, this allows you to play the music from a compact disc, while displaying the picture from a video cassette player or other video source.
The default settings are given below.
Input source selected | Video |
|
|
CD | Last |
|
|
PHONO | Last |
|
|
FM | Last |
|
|
AM | Last |
|
|
TAPE | Last |
|
|
DVD | DVD |
|
|
VIDEO1 | VIDEO1 |
|
|
VIDEO2 | VIDEO2 |
|
|
VIDEO3 | VIDEO3 |
|
|
VIDEO4 | VIDEO4 |
|
|
Last : When you change to an input source set to “Last,” the video of the input source that you changed from is continued. For example, if the selected input source is VIDEO 1, and you then change to CD (set to “Last”), then the audio from the CD input is played while the video from VIDEO 1 continues.
• If no video signal is to be assigned to the input source, set
b. Component
If a component is connected to the one of the COMPONENT VIDEO inputs (1 or 2), then that input must be set here. This setting will not appear if AM, FM, PHONO, CD or TAPE is selected as the input source.
The default settings are given below.
Input source selected | Component video input |
|
|
CD |
|
|
|
PHONO |
|
|
|
FM |
|
|
|
AM |
|
|
|
TAPE |
|
|
|
VIDEO 4 | |
|
|
VIDEO 3 | INPUT 2 |
|
|
VIDEO 2/VCR 2 | |
|
|
VIDEO 1/VCR 1 | |
|
|
DVD | INPUT 1 |
|
|
36