Example of how to connect your equipment
6. Connecting a satellite tuner or television
Using an
Using an
If the satellite tuner or television has a digital output jack as well, be sure to also connect it to either a DIGITAL INPUT (COAXIAL) or DIGITAL INPUT (OPTICAL) jack on the DTR-
7.1depending on the type of connector on the set top box or television.
With the initial settings of the
9. Connecting video camera or television game
Using an
Front panel of DTR-7.1
Master Volume
Video 4/Video Cam Input
connection is made at a jack different from the initial settings, this must be changed at the OSD Menu: Input Setup → Audio Setup → Digital Input (see page 34).
7.Connecting a DVD recorder or other digital video recording device
Using an
S Video |
Video |
L - Audio - R |
OUT jacks. If there is an S video input/output terminal on the device, connect it to the S VIDEO 1 IN/OUT jack using an S video cable. If the device has component video outputs, connect them to one of the COMPONENT VIDEO INPUT jacks.
Using an
If the device has a digital output jack as well, be sure to also connect it to either a DIGITAL INPUT (COAXIAL) or DIGITAL INPUT (OPTICAL) jack on the
With the initial settings of the
If the device also has a digital input jack, it can be connected to the DIGITAL OUTPUT (OPTICAL) jack on the
8. Connecting a television monitor or projector
Using an
Caution:
Note that the OSD Menu will only be displayed on the monitor connected to MONITOR OUT and not those connected to the COMPONENT VIDEO OUTPUT jacks.
Video camera
(VIDEO 4)
9. Refer to page 19
The VIDEO 4 INPUT jack is equipped with a protective cap. When using this jack, remove the protective cap and keep it safely. When not using this jack, replace the protective cap.
Video 4/Video Cam Input
S Video | - Audio - R |
Protective cap
19