Integra DTR-7.1 OSD Setup, a. Background Color, b. Superimpose, c. Immediate Display, Hint

OSD Setup

5-2. OSD Setup sub-menu

This sub-menu allows you to customize the OSD menu to display in the manner you desire.

Menu

1.Speaker Setup

5.OSD Setup

2.Input Setup

3.Listening Mode Setup

4.Preference

51-.2OSD.OSDConfigSetup

5.OSD Setup

2.OSD Setup

3.OSD Position

a.Background Color

:Blue1

b.Superimpose Mode

ENTER Quit:OSD

:Normal

c.Immediate Display

ENTER Quit:OSD:On

d.Display Position

:Bottom

Quit:OSD

a. Background Color

Select either Blue1, Blue2, Green1, Green2, Magenta, Red1, or Red2 as the background color while the OSD menu is displayed.

b. Superimpose

Off: Select to have the OSD menu displayed on the selected background color.

Normal: Select to have the OSD menu superimposed over the current video if one is displayed or on the selected background color if there is no video signal.

Black: Select to have the OSD menu displayed on a black background at all times.

c. Immediate Display

On: Select this to have the screen immediately display certain operations as you perform them. The display will remain for a few seconds after the operation is completed.

VIDEO 1

Off: Select this to turn off the immediate display of operations.

Hint:

If this is set to “Off,” the background color will not be displayed even when there is no video signal input.

d. Display Position

Use this setting to select the position of the immediate display that appears when certain operations are performed. You can position the immediate display at any of ten different levels ranging from the top all the way to the bottom.

5-3. OSD Position sub-menu

This sub-menu allows you to adjust the position of the OSD menu as it is displayed on your screen. Depending on the monitor used, there may be cases where the OSD menu is not displayed in the center and parts of the menus are cut off. To adjust the position of the OSD menu, simply press the cursor buttons to inch the menu to position you desire.

Menu

1.Speaker Setup

5.OSD Setup

2.Input Setup

3.Listening Mode Setup

4.Preference

51-.3OSD.OSDConfigPosition

5.OSD Setup

2.OSD Setup

3.OSD Position

ENTER Quit:OSD

ENTER Quit:OSD

Exit:EXIT Quit:OSD

47