Integra DTR-7.1 appendix Using remote controller, Overview, Press the AUDIO/TAPE MODE button

Using remote controller

Overview

SEND/LEARN indicator

ON STNBY

AUDIO/TAPE

MODE

ON STNBY

SLEEP LIGHT

AUDIO/TAPE

MODE

DISPLAY

CH						VOL
AUDIO	AUDIO			MUTING		TEST
						MUTING
		TRACK	DISC
	REC			OPEN/COLSE
	DVD			CD		INPUT
	T1	T2	TUN	PH		SELECTOR
						buttons
	V1	V2	V3	V–
						Listening
		1	2	3
	STEREO		DIRECT	DSP
	SURROUND		THX	DSP		mode buttons
		4	5	6
Re-EQ	Re-EQ		CH SEL	LEVEL	+	LEVEL +
		7	8	9
LATE NIGHT	LATE NIGHT DIMMER			LEVEL	–	LEVEL –
	+ 10		0	ENT
DIMMER		HOME THEATER CONTROLLER				CH SEL
		RC-418M

56

The RC-418M remote controller is a useful tool to help you operate the components of your home theater. To do so, first press the Mode button that corresponds to the device you wish to control. At this time, the display on the remote controller will change to show the component that is selected. Then simply press the desired operation button and the component will operate accordingly. For example, if you wish to select the CD input source at the DTR-7.1 with the remote controller, first press the AUDIO/TAPE MODE button to select the DTR-7.1 (“AUDIO” will appear on the display) and then press the CD (INPUT SELECTOR) button.

Using the remote controller to control each device

In order to use the remote controller, you must first turn on the POWER switch at the DTR-7.1 so that it enters standby mode.

1.Press the AUDIO/TAPE MODE button.

“AUDIO” appears in the remote controller display.

2.Press the ON button to turn on the DTR-7.1 and press the STNBY button to put it back in the standby mode.

When you press the STNBY button on the remote controller, it puts the DTR-7.1 in the standby state but does not turn it completely off.

SEND/LEARN indicator

This indicator acts as a guide when commands are programmed into or sent by the remote controller. It also warns the user when an error is made or battery power is low.

Controlling the DTR-7.1

If “AUDIO” is already appears in the display, proceed to step 2.

1.Press the AUDIO/TAPE MODE button.

“AUDIO” appears in the remote controller display.

2.Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can used to control the DTR-7.1.