Integra DTR-7.1 Specifications, Amplifier Section, Tuner Section, General, Remote Controller

Specifications

AMPLIFIER SECTION

Continuous Average Power output (FTC)

All channels:100 W per channel min. RMS at 8 , 2 channels driven from 20 H z to 20 kHz with no more than 0.08% total harmonic distortion. 130 W per channel min.

RMS at 6 , 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion.

Continuous Power output (DIN)	135 W at 6
Maximum Power output (EIAJ)	160 W at 6
Dynamic Power Output (Stereo)	2 ⋅ 250 W at 3
	2 ⋅ 210 W at 4
	2 ⋅ 130 W at 8
Total Harmonic Distortion:	0.08% at rated power
	0.08% at 1 W output
IM Distortion:	0.08% at rated power
	0.08% at 1 W output
Damping Factor:	60 at 8
Input Sensitivity and Impedance
PHONO:	2.5 mV, 50 k
LINE (CD, TAPE, DVD,
VIDEO 1-4):	200 mV, 50 k

MULTICHANNEL INPUT (FRONT L/C/R, SURROUND

L/R, SURROUND BACK L/R):200 mV, 50 k

(SUBWOOFER):	36 mV, 50 k
COAXIAL 1, 2 (DIGITAL):	0.5 Vp-p, 75
DVD, VIDEO1-4:	1 Vp-p, 75
	1 Vp-p, 75	(Y)
	0.28 Vp-p, 75 (C)
COMPONENT VIDEO 1, 2:	1 Vp-p, 75	(Y)
	0.7 Vp-p, 75	(P B, PR)
Output Level and Impedance
Rec out (TAPE, VIDEO 1, 2):	200 mV, 2.2 k
Pre out:	1 V, 470
ZONE2 OUT:	100 mV, 470
VIDEO (VIDEO 1, 2, MONITOR OUT):
	1 Vp-p, 75
	1 Vp-p, 75	(Y)
	0.28 Vp-p, 75 (C)
COMPONENT VIDEO OUT:	1 Vp-p, 75	(Y)
	0.7 Vp-p, 75	(P B, PR)
Phono Overload:	110 mV RMS at 1 kHz, 0.5% T.H.D.
Frequency Response:	20 Hz to 30 kHz: ±1 dB
	(CD in Direct mode)
	5 Hz to 100 kHz: +1 dB,-3 dB
	(CD in Direct mode)
RIAA Deviation:	20 to 20 kHz : ±0.8 dB
Tone Control
Bass:	±10 dB at 100 Hz
Treble:	±10 dB at 10 kHz
Signal-to-Noise Ratio (Stereo)
Phono:	80 dB (IHF A, 5 mV input)
CD/Tape:	100 dB (IHF A, 0.5 V input)
Muting:	–50 dB

TUNER SECTION
FM
Tuning Range:	87.5 to 108.0 MHz (50-kHz steps)
Usable Sensitivity
Mono:	11.2 dBf, 1.0 µV (75	IHF)
	0.9 µV (75 DIN)
Stereo:	17.2 dBf, 2.0 µV (75	IHF)
	23 µV (75 DIN)
50 dB Quieting Sensitivity
Mono:	17.2 dBf, 2.0 µV (75	)
Stereo:	37.2 dBf, 20 µV (75	)
Capture Ratio:	2.0 dB
Image Rejection Ratio:	40 dB
IF Rejection Ratio:	90 dB
Signal-to-Noise Ratio
Mono:	76 dB
Stereo:	70 dB
Alternate Channel Attenuation:	55 dB
Selectivity:	50 dB (DIN)
AM Suppression Ratio:	50 dB
Total Harmonic Distortion
Mono:	0.2%
Stereo:	0.3%
Frequency Response:	30 Hz to 15 kHz, ±1.0 dB
Stereo Separation:	45 dB at 1 kHz
	30 dB at 100 Hz to 10 kHz
AM
Tuning Range:	530 to 1,710 kHz (10 kHz steps)
Usable Sensitivity:	30 µV
Image Rejection Ratio:	40 dB
IF Rejection Ratio:	40 dB
Signal-to-Noise Ratio:	40 dB
Total Harmonic Distortion:	0.7%
GENERAL
Power Supply:	AC 120 V, 60 Hz
Power Consumption:	5.5 A
Dimensions (W ⋅ H ⋅ D):	17-1/8" ⋅ 6-7/8" ⋅ 18-1/8"
Weight:	36.4 lbs.
REMOTE CONTROLLER
Transmitter:	Infrared
Signal range:	Approx. 16 ft.
Power supply:	Two “AA” batteries (1.5 V ⋅ 2)

Specifications and features are subject to change without notice.

71