Connecting the loudspeakers
The EMP 2015 has four independent power amplifiers. Therefore, you can connect up to eight loudspeakers to the EMP 2015 Soundfield System.
When installing a system with up to eight loudspeakers, make sure that the individual loudspeakers have an impedance from 4 to 8 ohms. The peak pulse power must be 30 W minimum.
When using more than one loudspeaker, make sure that the individual loudspeakers have the same polarity
Danger of short circuit!
Never connect the loudspeaker cables to the ground and never allow the cables to come into contact with another cable or metal casing parts. During operation, the ends of the loudspeaker cables must never come into contact. This can cause a short circuit and may damage your speaker.
Connect a loudspeaker cable to each loudspeaker.
Connect each loudspeaker separately to the amplifer. Do not connect in
Connect one loudspeaker to each loudspeaker output .
47
