Sennheiser EMP 2015 manual Special adjustments, Basic functions of the Sennheiser operating menu

8 Special adjustments

Basic functions of the Sennheiser operating menu

With the Soundfield System, all necessary adjustments to the transmitter and receiver section settings can be made by using the SET and and buttons. The settings are indicated on the respective displays.

Important:

After turn-on, press the / buttons to switch between the factory- preset fixed frequency memories. The display starts flashing. Your selection becomes effective immediately. Press the SET button to acknowledge your selection. The flashing stops.

1.Press the SET button to enter the top menu level:

By briefly pressing SET again, you can change to the next menu. After approx. one second, the selected menu appears on the display and then the current setting of the menu is indicated.

2. Press the / buttons to adjust the settings of the selected menu:

The new setting starts flashing on the display. If you return to the previous setting, the flashing stops.

Important:

New settings become effective immediately and will be retained in memory on turn-off!

N.B.: When changing transmitter frequencies, care should be taken to avoid causing interference to other channels/users.

In the “tunE” and “Ch no” menu, the / buttons feature a “fast search” function. If you briefly press the / buttons, you can jump either forwards or backwards to the next setting. If you press and hold down a button, you can scroll through the settings.

3.Press the SET button to return to the top menu level:

Have you finished your entries? Press the SET button to return to the top menu level. The display then switches back to the standard setting.

59