SenSit

Adjusting the sensitvity (transmitter only)

 

If the microphone sensitivity is not adjusted correctly, the speaker’s voice

 

can sound distorted or noisy. Distortion occurs if the microphone sensitivity

 

is adjusted too high. In this case, the transmitter’s yellow audio peak indication

 

LED lights up . If, on the other hand, the sensitivity is adjusted too low,

 

the teacher’s voice will be overlaid with background noise.

 

Adjust the sensitivity so that the yellow audio peak indication LED only

 

lights up during the loudest passages.

The following figures are a guide to the best settings:

ME 3 headmic:

-10 dB

ME 2 and ME 4 microphones (accessories):

0 dB

External sound sources (e.g. CD player):

-30 / -20 dB

￿Press the SET button to select the “SEnSit” menu. “SEnSit” appears on

the display; after a short pause the current input sensitivity setting is indicated.

￿ With the / buttons you can now select a different setting. The sensitivity can be adjusted in 10-dB steps from 0 to -30 dB. The new setting starts flashing on the display and becomes effective immediately.

￿ Press the SET button to return to the top menu level. The display then switches back to the standard display.

60

Page 58
Image 58
Sennheiser EMP 2015 manual Adjusting the sensitvity transmitter only