Configuring a frequency memory
Transmitter and receiver section of the Soundfield System have 16 switchable frequency memories respectively to store up to 16 transmission and receiving frequencies. The 16
If you use more than 16 Soundfield Systems in neighboring rooms, a minimum spacing of 400 kHz between two carrier frequencies must be maintained. Within the 32 MHz frequency window, you can therefore operate up to 80 systems without having to use a frequency twice.
Note:
In contrast to the Soundfield System, standard FM systems operate in the
VHF band so that both systems cannot interfere with each other.
Operating steps for configuring a frequency memory
1. Select a frequency memory
Press the / buttons to select a
Press the SET button to acknowledge your selection. The display stops flashing. (If the SET button is not pressed, the device will store the new setting automatically on
Note:
You can choose the content of the standard display i.e. whether the frequency or the channel number is displayed ( “Selecting the content of the standard display”). The devices are
tunE | 2. Select a different frequency |
Press the SET button three times to select the “tunE” menu. “tunE” appears
on the display; after a short pause the currently set frequency is indicated.
With the / buttons you can now select a different frequency. The frequencies are tunable in
Press the SET button to return to the top menu level. The display then switches back to the standard display.
Important note:
Set the transmitter AND the receiver to exactly the same frequency!
62
