Adapting the system sensitvity to the connected receivers
Turn the line input sensitivity control (LINE IN) | clockwise as far as |
possible. |
|
Adjust the output level on the EM 500 receiver as described in the receiver’s instruction manual.
Installing a system including two transmitters and an audio device
You can also connect an additional receiver and an external audio device (e.g. VCR) to the two line inputs (LINE IN) of the EMP 2015. With such a system, the signals of two speakers speaking simultaneously and the signals of a VCR or similar are then reproduced by loudspeakers in the room. (In addition, you can connect sound recording devices to the two line outputs (LINE OUT) of this system.)
To install this system, please proceed as described in the chapters “Installing a system with several transmitters (team teaching)” and “Connecting external audio devices”.
57
