Problem

Possible cause

What to do

Dropouts

Antenna sensitivity is not sufficient

Use a remote or telescopic

Speaker’s voice overlaid

 

antenna

with background noise

Transmitting antenna is not connected

Connect the antenna

 

 

Connection of transmitting antenna

Screw the antenna tight

 

has worked loose

 

 

Transmission frequency is not the

Set the transmitter and the

 

same as the receiving frequency

receiver section to the same

 

 

frequency

 

 

( “Special adjustments”)

Sound is not clear / rough

Several transmitters in the same

 

room or in neighboring rooms

 

Microphone is covered or

 

positioned too far from the mouth

 

Transmission frequency is not the

 

same as the receiving frequency

Check the frequency settings

(“Special adjustments”) Position the microphone at the corner of the mouth Set the transmitter and the receiver section to the same frequency

(“Special adjustments”)

￿If problems occur that are not listed in the above table, please contact your local Sennheiser agent for assistance.

68

Page 66
Image 66
Sennheiser EMP 2015 manual Problem Possible cause What to do