Sennheiser MM 100 LED indications, Button To be pressed Skip forward */accept call 11/11

LED indications

Button	To be pressed	To ...	Page
		skip forward*/accept call	11/11

	reject a call	11
2s	redial*, transfer calls between headset and mobile	12, 12
	phone*
	enter pairing mode	9
5s
	skip backward*/accept call	11/11
	reject a call	11
2s	transfer calls between headset and mobile phone*	12
	voice dial*	12
	enter pairing mode	9
5s

*These functions must be supported by the mobile phone.

LED indications

Meaning during operation
LED flashing		Meaning during operation
	blue and red	Pairing mode
	once every 3 seconds	Standby mode
3s
	glowing slowly every	Audio streaming mode
4s	4 seconds
	rapidly	Active call mode
1s	(once every second)
	several times every second	Searching mode
	slowly	Idle mode
1s	(once every second)

For a more detailed description of the LED indications, see “Switching the headset on” on page 8.

After switch-on, flashing of the LED in blue indicates that the battery charge status is OK; flashing in red indicates a low battery. When the battery is about to run flat, all indications turn red.

6