Sennheiser MM 100 instruction manual Calling, Press, Phone call, Rejecting call, Ending a call

Using the MM 100

To ... Press

start playback

pause playback

skip to the next track in the playlist/ folder

skip to the previous track in the playlist/folder

If your Bluetooth device does not support the audio/video remote control profile (AVRCP):

￿You have to operate play, pause, stop and skip via the audio player software of your Bluetooth device.

	Calling
	Provided the headset is switched on, paired and within the transmission range of a mobile phone (see page 9),
	you can accept and make calls with the MM 100. When you receive a call while listening to music, the music
	automatically pauses and starts playing again after the call has ended.
Accepting a mobile	When you receive a call via your mobile phone, you hear a ring tone in the headset. If the mobile phone is set to
phone call	silent alert or vibrating alert, you will hear no ring tone in the headset.
	￿ Press the Play/Pause button .
	Or
	￿ Press the Next button or Prev. button .
	An ascending confirmation beep is heard in the headset. Audio streaming is automatically paused.
	￿ Start to talk.

Rejecting call

2s

￿ Press and hold the Play/Pause button for 2 seconds. Or

￿ Press and hold the Next button or Prev. button for 2 seconds.

A descending confirmation beep is heard in the headset. The ringing stops. Depending on the settings of the mobile phone or Bluetooth device, the call is either rejected or transferred to a voice mailbox.

Ending a call	￿ During the call, press the Play/Pause button . A descending confirmation beep is heard in the headset. If
	any audio streaming was paused when the call was accepted, it will automatically resume.

￿Refer to the manual of your mobile phone for information on whether your mobile phone hangs up automat-

ically or you have to hang up manually.

11