Manuals / Brands / Home Audio / Satellite Radio / Sennheiser / Home Audio / Satellite Radio

Sennheiser SK 5212-II Using the bodypack transmitter, Switching the transmitter on/off

1 34

Download 34 pages, 2.38 Mb

Using the bodypack transmitter

Switching the transmitter on/off

	Open the battery compartment.

	To switch the transmitter on:
	Briefly press the ON/OFF button .
	The red LED lights up normally and the standard
	display is shown on the LC display panel ; after a short
	pause, “RF” appears on the LC display panel.

Remove the battery when the transmitter will not be used for extended periods of time.

The transmitter can only be switched off when the lock mode is deactivated (see page 11).

To switch the transmitter off, press the ON/OFF button until “OFF” appears on the LC display panel .

The red LED and the LC display panel go off.

When in the setting mode of the operating menu, the ON/OFF button will cancel your entry (ESC function).

Contents

Page Contents Important safety instructions The SK 5212-IIbodypack transmitter Page Delivery includes Product overview Overview of the SK 5212-IIbodypack transmitter Overview of the displays Putting the bodypack transmitter into operation Inserting and changing the battery Connecting the microphone Connecting the antenna Attaching the transmitter to clothing Using the bodypack transmitter Switching the transmitter on/off Doing a frequency check The automatic lock mode (autolock function) Page Using operating menu The buttons ON/OFF SET Overview of the operating menu Working with the operating menu After switch-on Displaying the menu settings in display mode Changing to the selection mode Slide the multi-functionswitch to the position (UP) or (DOWN) Adjusting a setting Use the multi-functionswitch to adjust the setting of the selected menu Storing a setting indicating that the setting has been stored The display then returns to the last edited menu Overview of the menus Page Adjustment tips for the operating menu Selecting a channel – “CHAN“ Selecting the frequencies to be stored in the frequency bank “VAR” – “TUNE” Page Entering a name – “NAME” Adjusting the microphone sensitivity – “ATTEN” Adjusting the bass roll-offfrequency – “LOWCUT” Selecting the standard display – “VIEW” Loading the factory-presetdefault settings – “RESET” Activating/deactivating the automatic lock mode – “LOCK” Adjusting the output power – “POWER” Displaying the software revision – “SW--REV“ Exiting the operating menu – “EXIT” Cleaning the bodypack transmitter CAUTION Recommendations and tips If a problem occurs Accessories Specifications Page Page Manufacturer Declarations Directive Page Sennheiser electronic GmbH & Co. KG