Sennheiser SK 5212-II 30

Specifications

Power consumption	PWR.LO:	approx. 150 mA (10 mW) at 1.5 V
(without LC display illumination)	PWR.HI:	approx. 220 mA (50 mW) at 1.5 V
	PWR.LoI: approx. 220 mA (10 mW) at 1.5 V

Operating time	PWR.LO:	approx. 10 hrs
	PWR.HI:	approx. 5.5 hrs
	PWR.LoI: approx. 5.5 hrs

Connections	AF: 3-pin special audio socket
	RF: coax socket

Dimensions	approx. 53 x 60 x 17 mm

Weight	approx. 124 g incl. battery and antenna
Operating conditions
Operating conditions

Ambient temperature	–10°C to +55°C

Relative humidity	max. 90% (non condensing)

Power supply	1 AA size battery, 1.5 V
Storage and transport conditions
Storage and transport conditions

Ambient temperature	–25°C to +70°C

Relative humidity	max. 90%

Shock test	shock test according to IEC 68 or EN 60068, T2-27
In compliance with
In compliance with

Europe:	EMC	EN 301489-1/-9
	Radio	EN 300422-1/-2
	Safety	EN 60065
		EN 62311 (SAR)

Contents

Page Contents Important safety instructions The SK 5212-IIbodypack transmitter Page Delivery includes Product overview Overview of the SK 5212-IIbodypack transmitter Overview of the displays Putting the bodypack transmitter into operation Inserting and changing the battery Connecting the microphone Connecting the antenna Attaching the transmitter to clothing Using the bodypack transmitter Switching the transmitter on/off Doing a frequency check The automatic lock mode (autolock function) Page Using operating menu The buttons ON/OFF SET Overview of the operating menu Working with the operating menu After switch-on Displaying the menu settings in display mode Changing to the selection mode Slide the multi-functionswitch to the position (UP) or (DOWN) Adjusting a setting Use the multi-functionswitch to adjust the setting of the selected menu Storing a setting indicating that the setting has been stored The display then returns to the last edited menu Overview of the menus Page Adjustment tips for the operating menu Selecting a channel – “CHAN“ Selecting the frequencies to be stored in the frequency bank “VAR” – “TUNE” Page Entering a name – “NAME” Adjusting the microphone sensitivity – “ATTEN” Adjusting the bass roll-offfrequency – “LOWCUT” Selecting the standard display – “VIEW” Loading the factory-presetdefault settings – “RESET” Activating/deactivating the automatic lock mode – “LOCK” Adjusting the output power – “POWER” Displaying the software revision – “SW--REV“ Exiting the operating menu – “EXIT” Cleaning the bodypack transmitter CAUTION Recommendations and tips If a problem occurs Accessories Specifications Page Page Manufacturer Declarations Directive Page Sennheiser electronic GmbH & Co. KG