Using operating menu

After switch-on

After switch-on, the standard display is shown on the LC display panel. Depending on the setting, the transmission frequency, the channel number or the name of the transmitter is displayed.

Displaying the menu settings in display mode

In display mode, and with the lock mode activated, you can display the current menu settings one after the other (see “Overview of the menus” on page 18). After a few seconds, the display returns to the standard display.

SET

DOWN UP

Slide the multi-function switch to the position  (UP) or  (DOWN) to display the menu settings. If you slide the multi-function

switch repeatedly to the same position, all menu settings are displayed one after the other.

Changing to the selection mode

To change from display mode to selection mode, you have to deactivate the lock mode.

Deactivate the lock mode as described in the chapter “Deactivating the autolock function temporarily” on page 12. You can now select the menu whose settings you want to adjust.

Press the multi-function switch (switch position SET). You change to the menu that was displayed in display mode.

Selecting a menu

 

 

SET

 Slide the multi-function switch to the position  (UP) or 

DOWN

UP

(DOWN).

 Press the multi-function switch (switch position SET). The name of the selected menu starts flashing.

Changing to the setting mode of a selected menu

SET

DOWN UP

Press the multi-function switch (switch position SET).You change to the setting mode of the selected menu where you can

adjust settings. The current setting that can be adjusted flashes on the LC display panel .

16