If a problem occurs ...
If a problem occurs ...
Problem | Possible cause | Possible solution |
No operation | Battery is flat or inserted | Replace the battery or check if it |
indication | incorrectly | is inserted correctly |
Transmitter cannot be | Lock mode is activated | Deactivate the lock mode |
switched off/ |
| (see page 12) |
Settings cannot be |
|
|
changed |
|
|
Receiver: | Transmitter and receiver are not | Set transmitter and receiver to |
No RF signal | on the same channel | the same channel |
| Transmitter is out of range | Check the squelch threshold |
|
| setting on the receiver or reduce |
|
| the distance between receiving |
|
| antenna and transmitter |
|
|
|
Audio signal has a high | Transmitter’s sensitivity is set | See “Adjusting the microphone |
level of background | too high | sensitivity – “ATTEN”” on |
noise |
| page 22 |
| Receiver’s output level is set | Increase the line output level |
| too low |
|
|
|
|
Audio signal is | Transmitter’s sensitivity is set | See “Adjusting the microphone |
distorted | too low | sensitivity – “ATTEN”” on |
|
| page 22 |
| Receiver’s output level is set | Reduce the line output level |
| too high |
|
|
|
|
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance.
26