Sennheiser SK 5212-II Doing a frequency check, The automatic lock mode (autolock function), LOCK, button pressed, Release the ON/OFF button,  Release the ON/OFF button

Using the bodypack transmitter

Doing a frequency check

The transmitter has a frequency check mode that prevents the transmitter transmitting on an unwanted frequency after switch-on.

	 When switching on the transmitter, keep the ON/OFF
	button  pressed.
	The RF signal is deactivated. The current frequency is
	displayed on the LC display panel .
	If the displayed frequency is the correct one,
	 Release the ON/OFF button .
	After five seconds, “RF”  appears on the LC display
	panel and the RF signal is activated.
	￿
	RF
	MHz

To change the transmission frequency, proceed as follows:Release the ON/OFF button .Within five seconds change to the “CHAN” or “TUNE” menu item.

Change the transmission frequency (see “Adjustment tips for the operating menu” on page 20).

The automatic lock mode (autolock function)

The transmitter has an autolock function (automatic lock mode) that can be activated or deactivated via the “LOCK” menu (see page 24). When the autolock function is activated, the lock mode is automatically activated 10 seconds after pressing the last button.

RF

MHz

4

Prior to this, the lock mode icon  flashes several times on the LC display panel , indicating that the lock mode is being activated.

The autolock function can be deactivated permanently (see page 24) or temporarily (see page 12).

11