Sennheiser SK 5212-II 13

Using the bodypack transmitter

Deactivating the autolock function temporarily

To make changes to the settings via the operating menu, you can temporarily deactivate the lock mode.

		Press the ON/OFF button or the multi-function switch
		(switch position SET).
		(switch position SET).
		“LOCK” appears on the LC display panel .
		Slide the multi-function switch to the position (UP)
		or (DOWN).
		“UNLOCK” appears on the LC display panel .
		“UNLOCK” appears on the LC display panel .
		Press the multi-function switch (switch position
		SET).
		You can now change the settings.

SET

DOWN UP

After you have exited the operating menu, the lock mode is automatically activated after 10 seconds. You can activate the lock mode immediately by briefly pressing the ON/OFF button .

Contents

Page Contents Important safety instructions The SK 5212-IIbodypack transmitter Page Delivery includes Product overview Overview of the SK 5212-IIbodypack transmitter Overview of the displays Putting the bodypack transmitter into operation Inserting and changing the battery Connecting the microphone Connecting the antenna Attaching the transmitter to clothing Using the bodypack transmitter Switching the transmitter on/off Doing a frequency check The automatic lock mode (autolock function) Page Using operating menu The buttons ON/OFF SET Overview of the operating menu Working with the operating menu After switch-on Displaying the menu settings in display mode Changing to the selection mode Slide the multi-functionswitch to the position (UP) or (DOWN) Adjusting a setting Use the multi-functionswitch to adjust the setting of the selected menu Storing a setting indicating that the setting has been stored The display then returns to the last edited menu Overview of the menus Page Adjustment tips for the operating menu Selecting a channel – “CHAN“ Selecting the frequencies to be stored in the frequency bank “VAR” – “TUNE” Page Entering a name – “NAME” Adjusting the microphone sensitivity – “ATTEN” Adjusting the bass roll-offfrequency – “LOWCUT” Selecting the standard display – “VIEW” Loading the factory-presetdefault settings – “RESET” Activating/deactivating the automatic lock mode – “LOCK” Adjusting the output power – “POWER” Displaying the software revision – “SW--REV“ Exiting the operating menu – “EXIT” Cleaning the bodypack transmitter CAUTION Recommendations and tips If a problem occurs Accessories Specifications Page Page Manufacturer Declarations Directive Page Sennheiser electronic GmbH & Co. KG