Adjustment tips for the operating menu

Entering a name – “NAME”

Via the “NAME” menu, you can enter a freely selectable name for the transmitter. This name can be displayed on the standard display and can consist of up to six characters such as:

•letters (without pronounciation marks),•numbers from 0 to 9,•special characters and spaces.

After you have changed to the setting mode of the “NAME” menu, the first segment starts flashing on the LC display panel .

SET

DOWN UP

 Slide the multi-function switch to the position  (UP) or (DOWN) to select a character.

(By sliding the switch only once, the display jumps either forwards or backwards to the next character. If you keep the switch slid, the display starts cycling continuously.)

Press the multi-function switch (switch position SET) to change to the next segment.

Have you entered the name completely? Press the multi-function switch (switch position SET) to store your setting. “STORED” appears on the LC display panel.

Adjusting the microphone sensitivity – “ATTEN”

Via the “ATTEN” menu, you can adjust the transmitter’s sensitivity.



RF AF

dB



The sensitivity is correctly adjusted when the level display for audio signal “AF”  shows full deflection only during the loudest passages or when the red LED  lights up brightly.

The sensitivity can be adjusted in 1-dB steps from +40 dB to –30 dB.

The bargraph has a resolution of approx. 3 dB per segment with a display range of 45 dB.

22