Manuals / Brands / Home Audio / Satellite Radio / Sennheiser / Home Audio / Satellite Radio

Sennheiser SK 5212-II Putting the bodypack transmitter into operation, Inserting and changing the battery, Connecting the microphone

1 34

Download 34 pages, 2.38 Mb

Putting the bodypack transmitter into operation

Inserting and changing the battery

For powering the transmitter, use a 1.5 V AA size battery.

	Open the battery compartment by pushing the two
	catches in the direction of the arrows and open the
	cover .

Insert the battery as shown in the diagram on the left. Please observe correct polarity when inserting the battery.

Close the battery compartment.

Connecting the microphone

The transmitter is designed for use with Sennheiser lavalier microphones and headmics. The power supply of these microphones is via the microphone input of the transmitter.

Connect the microphone to the microphone input of the transmitter.

Screw down the coupling ring.

Contents

Page Contents Important safety instructions The SK 5212-IIbodypack transmitter Page Delivery includes Product overview Overview of the SK 5212-IIbodypack transmitter Overview of the displays Putting the bodypack transmitter into operation Inserting and changing the battery Connecting the microphone Connecting the antenna Attaching the transmitter to clothing Using the bodypack transmitter Switching the transmitter on/off Doing a frequency check The automatic lock mode (autolock function) Page Using operating menu The buttons ON/OFF SET Overview of the operating menu Working with the operating menu After switch-on Displaying the menu settings in display mode Changing to the selection mode Slide the multi-functionswitch to the position (UP) or (DOWN) Adjusting a setting Use the multi-functionswitch to adjust the setting of the selected menu Storing a setting indicating that the setting has been stored The display then returns to the last edited menu Overview of the menus Page Adjustment tips for the operating menu Selecting a channel – “CHAN“ Selecting the frequencies to be stored in the frequency bank “VAR” – “TUNE” Page Entering a name – “NAME” Adjusting the microphone sensitivity – “ATTEN” Adjusting the bass roll-offfrequency – “LOWCUT” Selecting the standard display – “VIEW” Loading the factory-presetdefault settings – “RESET” Activating/deactivating the automatic lock mode – “LOCK” Adjusting the output power – “POWER” Displaying the software revision – “SW--REV“ Exiting the operating menu – “EXIT” Cleaning the bodypack transmitter CAUTION Recommendations and tips If a problem occurs Accessories Specifications Page Page Manufacturer Declarations Directive Page Sennheiser electronic GmbH & Co. KG